Description
Festo Servo drive CMMT-AS-C12-11A-P3-MP-S1
- Type of mounting Mounting plate, attached with screws
- Mounting position Free convection
- Vertical
- Product weight 4100 g
- Display Green/yellow/red LED
- Operator controls Optional: CDSB operator unit
- Conforms to standard EN 61800-3
- EN 61800-5-1
- EN 61800-5-2
- EN ISO 13849-1
- Based on standard EN 50581
- EN 60204-1
- EN 61508-1
- EN 61508-2
- EN 61508-3
- EN 61508-4
- EN 61508-5
- EN 61508-6
- EN 61508-7
- EN 61800-2
- EN 62061
- Approval RCM trademark
- German Technical Control Board (TÜV) c UL us listed (OL)
- KC mark KC-EMV
- CE mark (see declaration of conformity) To EU EMC Directive
- To EC Machinery Directive
- In accordance with EU RoHS Directive
- CE marking (see declaration of conformity) To UK instructions for EMC
- To UK regulations for machines
- To UK RoHS instructions
- Certificate issuing authority German Technical Control Board (TÜV) Rheinland UK Ltd. 01/205U/5640.01/23
- German Technical Control Board (TÜV) Rheinland 01/205/5640.01/23
- UL E331130
- Storage temperature -25 °C … 55 °C
- Ambient temperature 0 °C … 50 °C
- Note on ambient temperature Power must be reduced by 3% per °C at ambient temperatures above 40°C.
- UL ambient temperature 0 °C … 40 °C
- Relative air humidity 5 – 90%
- Non-condensing
Max. installation height 2000 m - Note on max. installation height From 1000 m: power reduction by 1% per 100 m.
- Degree of protection IP20
- Protection class I
- Overvoltage category III
- Pollution degree 2
- Immunity to surge 6 kV
- Note on materials RoHS-compliant
- LABS (PWIS) conformity VDMA24364 zone III
- Phases of nominal operating voltage 3-phase
- Nominal operating voltage AC 400 V
- Permissible voltage fluctuations +/- 10 %
- Input voltage range AC 200 V … 480 V
- Mains frequency 48 Hz … 62 Hz
- Nominal current, load supply 15 A
- Peak current load power supply 45 A
- Active PFC no
- Mains filter Integrated
- System voltage to EN 61800-5-1 300 V
- Max. short circuit current rating of the mains 10 kA
- Mains types TN
- IT
- Nominal voltage load voltage DC 560 V
- Permissible range for load power supply ± 10 %
- Max. intermediate circuit voltage DC 800 V
- Brake resistor, integrated 47 Ohm
- Pulse power, brake resistance 13.6 kVA
- Pulse energy for braking resistor 1200 Ws
- Nominal power braking resistor (IEC) 100 W
- Brake resistor, external 40 Ohm … 60 Ohm
- Max. continuous output of the external braking resistor (IEC) 3000 W
- Nominal voltage for logic power supply DC 24 V
- Permissible range for logic voltage ± 20 %
- Current consumption of logic power supply without clamping brake 0.5 A
- Current consumption for logic supply with parking brake 2 A
- Max. current consumption, logic power supply with clamping brake and
- I/O
- 2.5 A
- Output voltage class AC 3x (0 – input) V
- Nominal current per phase, effective 12 A
- Peak current per phase, effective 36 A
- Max. peak current duration 2 s
- Controller nominal output 6000 VA
- Maximum output 18000 VA
- Output frequency 0 Hz … 599 Hz
- Max. length of motor cable without external mains filter 25 m
- Max. output current of holding brake 1.5 A
- Max. voltage drop from logic supply to brake output 1 V
- Number of inputs for motor temperature sensor 1
