Description
Festo Semi-rotary drive DAPS-0360-090-R-F0710
- Size of valve actuator 0360
- Flange hole pattern F07
- F10
- Swivel angle 90 deg
- End-position adjustment range at 0° -1 deg … 9 deg
- Shaft connection depth 24.3 mm
- Fitting connection conforms to standard ISO 5211
- Cushioning No cushioning
- Mounting position optional
- Mode of operation Double-acting
- Design Scotch yoke system
- Position detection Without
- Closing direction Closes to the right
- Symbol 00991265
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- Safety Integrity Level (SIL) To SIL 2 Low Demand mode
- Operating pressure 0.1 MPa … 0.84 MPa
- Operating pressure 1 bar … 8.4 bar
- Nominal operating pressure 0.56 MPa
- Nominal operating pressure 5.6 bar
- Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) 1 Hz
- CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
- CE marking (see declaration of conformity) To UK EX instructions
- Explosion protection Zone 1 (ATEX)
- Zone 2 (ATEX)
- Zone 21 (ATEX)
- Zone 22 (ATEX)
- Certificate issuing authority German Technical Control Board North (TÜV Nord) 212170801
- ATEX category gas II 2G
- ATEX category dust II 2D
- Explosion ignition protection type for gas Ex h IIC T6…T3 Gb X
- Explosion ignition protection type for dust Ex h IIIC T85°C…T200°C Db X
- Explosion ambient temperature -20°C <= Ta <= +60°C
- Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
- Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
- Corrosion resistance class CRC 3 – high corrosion stress
- LABS (PWIS) conformity VDMA24364-B1/B2-L
- Ambient temperature -20 °C … 80 °C
- Torque at nominal operating pressure and 0° swivel angle 360 Nm
- Torque at nominal operating pressure and 50° swivel angle 180 Nm
- Torque at nominal operating pressure and 90° swivel angle 270 Nm
- Note on torque The operating torque of the actuator must not be higher than the
- maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.
- Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel
- angle-0°
- 12.6 l
- Product weight 6500 g
- Shaft connection T22
- Pneumatic connection G1/8
- Note on materials RoHS-compliant
- Material cover Wrought aluminium alloy
- Material seals FPM
- NBR
- PUR
- Material housing Wrought aluminium alloy
- Material screws High-alloy steel
- Material shaft High-alloy steel
- Material number shaft 1.4305
