Description
Festo Position transmitter SDAT-MHS-M160-1L-SA-E-0.3-M8
- Design For T-slot
- Symbol 00995389
- Approval RCM trademark
- c UL us listed (OL)
- CE mark (see declaration of conformity) To EU EMC Directive
- CE marking (see declaration of conformity) To UK instructions for EMC
- Note on materials RoHS-compliant
- Free of halogen
- Instructions on use https://www.festo.com/Drive-Sensor-Overview
- Measured variable Position
- Measuring principle Magnetic Hall
- Sensing range 0 µm … 160000 µm
- Ambient temperature -25 °C … 70 °C
- Typical sampling interval 1 ms
- Max. travel speed 3 m/s
- Displacement resolution 0.05 mm
- Repetition accuracy 0.1 mm
- Switching output PNP
- Switching element function N/C or N/O contact, switchable
- Switch-on time <2 ms
- Switch-off time <2 ms
- Max. switching frequency 1000 Hz
- Max. output current 100 mA
- Max. switching capacity DC 2.7 W
- Voltage drop 2.5 V
- Analogue output 4 – 20 mA
- Sensitivity 0.1 mA/mm
- Typical linearity error ±0.25 mm
- Max. load resistance current output 500 Ohm
- Short circuit current rating yes
- Overload protection Available
- Protocol I-Port
- IO-Link®
- IO-Link, Protocol version Device V 1.1
- IO-Link, Profile Smart sensor profile
- IO-Link, Function classes Binary data channel (BDC)
- Process data variable (PDV)
- Identification
- Diagnostics
- Teach channel
- IO-Link, communication mode COM3 (230.4 kBaud)
- IO-Link, SIO-Mode support Yes
- IO-Link, Port class A
- IO-Link, Process data length IN 2 bytes
- IO-Link, Process data content IN 12 bit PDV (measured position value)
- 4 bit BDC (position monitoring)
- IO-Link, Min. cycle time 1 ms
- Operational voltage range DC 15 V … 30 V
- Residual ripple 10 %
- Reverse polarity protection For all electrical connections
- Electrical connection 1, connection type Cable with plug
- Electrical connection 1, connector system M8x1, A-coded, to EN 61076-2-104
- Electrical connection 1, number of connections/cores 4
- Electrical connection 1, type of mounting Screw-type lock
- Electrical connection 1, connection pattern 00991171
- Connection outlet orientation In-line
- Material electrical contact Copper alloy
- Bronze
- Test conditions cable Bending strength: to Festo standard
- Torsional resistance: > 300,000 cycles, ± 270°/0.1 m
- Energy chain: > 5 million cycles, bending radius 28 mm
- Cable length 0.3 m
- Cable characteristic Suitable for energy chains/robot applications
- Cable sheath colour grey
- Material cable sheath TPE-U(PUR)
- Type of mounting Screw-clamped
- Insertable in the slot from above
- Mounting position optional
- Product weight 35 g
- Material housing Brass, nickel-plated
- PA-reinforced
- Polyester
- High-alloy stainless steel
- Material union nut Nickel-plated brass
- Material foil Polyester
- Ready status indication Green LED
- Switching status indication Yellow LED
- Status indication Red LED
- Setting options IO-Link®
- Pushbutton
- Ambient temperature with moving cable -20 °C … 70 °C
- Degree of protection IP65
- IP68
- LABS (PWIS) conformity VDMA24364-B2-L
- Suitability for the production of Li-ion batteries Metals with more than 1% copper, zinc or nickel by mass are excluded
- from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils
- Cleanroom class Class 4 according to ISO 14644-1
