DJI Industrial Drones for Search, Rescue, and Disaster Response

Posted on by
DJI Industrial Drones for Search, Rescue, and Disaster Response

DJI Industrial Drones for Search, Rescue, and Disaster Response

Search & Rescue. Efficiently scan vast areas and pinpoint missing individuals thanks to high-resolution digital and thermal cameras

Disaster Response. Fly over affected areas, document damage to infrastructure and property, and optimize relief efforts

How Drones Support Search & Rescue:

1. Scan wide areas and identify threats to victims and responders with high-resolution aerial imagery.

2. Elevate responders’ perspective and bring search and rescue to new levels of efficiency.

3. At night, or in low-light conditions, leverage thermal sensors to locate missing persons who might otherwise be overlooked.

Bringing The Elios 2 And Elios 3 To Firefighting and Rescue Response

Posted on by
Bringing The Elios 2 And Elios 3 To Firefighting and Rescue Response

Bringing The Elios 2 And Elios 3 To Firefighting and Rescue Response

Benefits:

SPEED. The Elios 3 can be used for rapid situational awareness flights lasting less than 10-minutes, providing key information quickly and enabling a fast response to the scenario.

SAFETY. The survey with the Elios 3 can be used to inform teams about a life emergency event, as well as plan safe entry during and after the incident.

ACCOUNTABILITY. After an emergency incident, the 3D model created with data collected by the Elios 3 can be used as part of assessing the response to the emergency and how to optimize future operations.

ACCESS: The Elios 3 can enter dangerous environments before people, checking if it is safe to reach and providing key information. This can be used to plan the next steps by personnel.

Stay safe during typhoon, stay safe during emergency response.

Dwyer Series SGZ Industrial Pressure Gages

Posted on by
Series SGZ Industrial Pressure Gages

Elevate your pressure measurement accuracy with the Dwyer’s Series SGZ Industrial Pressure Gages!

The Series SGZ Industrial Pressure Gages have dual psi and bar (x100 kPa) scales with ±1.5% full-scale accuracy. They are designed with 304 SS housings and 316 SS wetted parts for excellent chemical compatibility, covered a wide variety of ranges in either bottom or back connection configurations.

For more information on this product, you can visit this link.

3-in-1 Power Solution from ELIOS 3 Drone: Volume Calculation, Inspection, and UT Measurement

Posted on by
3-in-1 Power Solution from ELIOS 3 Drone: Volume Calculation, Inspection, and UT Measurement

3-in-1 Power Solution from ELIOS 3 Drone: Volume Calculation, Inspection, and UT Measurement

In getting the ELIOS 3 + Payloads, the ROI just got faster with the multiple things it can do in powerplant operation.

ELIOS 3 offers 3-in-1 Solution for power plants, including stockpile volume calculation, asset inspection and mapping, and UT Measurement.

1. Elios Volumetric Measurement (EVM): Utilizes LiDAR for accurate, risk-free stockpile measurements, eliminating the need for personnel to climb stockpiles or do traditional methods. Get volume calculations in minutes using CloudCompare!

2. Powerplant Assets Inspection: Improve worker safety, operational efficiency and data quality in your powerplant. The ELIOS 3 is a powerplant drone created to improve inspection safety and efficiency by up to 90%, saving the plant time and inspection costs.

3. Elios 3 + UT Payload: Combine visual inspection, LiDAR, and UT probe for safe UT measurements for indoor assets, confined spaces, and even outdoors. Easily do spot UT measurements in confined spaces and even at heights.

The 3 use-cases mentioned above are applicable to other industries as well like cement, mining, infrastructure, and more.

Contact us for a full presentation and demo of the ELIOS 3 solution and its growing list of tools and payloads.

AVK Series 76 Butterfly Valve

Posted on by
AVK Series 76 Butterfly Valve

The AVK Series 76 is a wide range of concentric, loose liner butterfly valves available in both flanged, wafer and lug design and with AVK’s own high quality rubber liner that significantly increases the service life.

The one-piece replaceable liner also serves as a profiled flange gasket and comes in either drinking water approved EPDM, high temperature EPDM or hydrocarbon resistant NBR. Disc material is stainless steel or epoxy coated ductile iron. The shaft in stainless steel, installed in low friction bronze/PTFE bearings in an anti-blow out design plus the unique disc sealing profile results in low operating torque and long life.

For any industrial valve needs, please contact us.

ABB Baldor Reliance General Purpose single phase enclosed motors

Posted on by
ABB Baldor Reliance General Purpose single phase enclosed motors

ABB Baldor Reliance General Purpose single phase enclosed motors

We offer an extensive line of ABB Baldor Reliance General Purpose single phase enclosed motors. In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E® Premium Efficient motors where energy savings is desired.

Optimize Air Quality and Boost Efficiency with the Festo MSB4 Service Unit Combination!

Posted on by
Optimize Air Quality and Boost Efficiency with the Festo MSB4 Service Unit Combination!

Optimize Air Quality and Boost Efficiency with the Festo MSB4 Service Unit Combination!

It ensures that your air supply is clean, regulated, and lubricated for maximum efficiency and longevity of your equipment. Whether you’re looking to improve productivity, reduce downtime, or extend the life of your machines, the MSB4 is your go-to solution. . The MS series from Festo offers a complete concept for compressed air preparation – for both standard applications and application-specific solutions.

Engineered for precision and reliability, it’s the perfect solution for any industrial setting where air quality and consistency are key.

Flyability’s Elios is an Infrastructure Drone!

Posted on by
Flyability's Elios is an Infrastructure Drone!

Flyability’s Elios is an Infrastructure Drone!

What are the benefits of using the Elios 3 for infrastructure management?

1. Safety – Reduce work at height, in confined spaces, and other dangerous environments for your team.

2. Speed – The drone can be deployed in minutes and gather data quickly with fewer safety protocols than people, speeding up operations.

3. Accuracy – with LiDAR scans accurate to 1 cm, you can trust results from the Elios 3 – whether from the 4K camera or powerful LiDAR scanner.

You can find out more about the revolution in infrastructure management that is the Elios 3 below:

https://www.flyability.com/infrastructure-inspection-drones

Meet the Q-DVL: The Heart of E-MASTER’s Stability

Posted on by
Meet the Q-DVL: The Heart of E-MASTER’s Stability

Meet the Q-DVL: The Heart of E-MASTER’s Stability

The FIFISH E-MASTER takes underwater stability to a new level with its advanced Q-DVL system. Whether navigating turbulent waters or conducting precise inspections, the forward and downward Q-DVLs ensure steady hovering and resistance to flows up to 3 knots.

FEATURES:

✅Smart collision avoidance for safer operations

✅Automatic distance and altitude locking for consistent height from the seabed

✅Enhanced mission efficiency with steady hovering even in challenging conditions

✅Built for the toughest underwater environments, the Q-DVL system guarantees reliable performance and boosts inspection accuracy. Stay safe, stable, and efficient – no matter the task.