Description
Dry-installed pump KSB Etabloc
Single-stage close-coupled volute casing pump, with ratings to EN 733, with replaceable shaft sleeve and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Features:
Excellent energy efficiency
- Advanced hydraulic system with high efficiencies: As standard, the impeller diameter is trimmed to match the duty point.
- Intelligent pump monitoring with KSB’s PumpMeter (optional)
- Intelligent variable speed system with KSB’s PumpDrive and KSB SuPremE® motor: energy savings of up to 60 percent
- ErP Directive (MEI ≥ 0.4): Minimum requirements are exceeded by far.
Reliable operation
- Pump hydraulic system with low NPSH values and optimum suction characteristics
- Confined volute casing gasket
- Large stud diameters and threads (M12/M16)
- The shaft protecting sleeve prevents wear of the pump shaft.
- The conical seal chamber of the mechanical seal prevents internal circulation and improves venting and flushing.
Wide range of variants
- Large range of shaft seals: single mechanical seal, gland packing and double mechanical seal as standard
- Large variety of materials for the most diverse of fluids handled
- Flanges to EN 1092, optionally with ASME bolt hole pattern (Etanorm only)
Ease of service
- Easily replaceable casing wear rings reduce wear at impeller and casing cover.
- Forcing screws at casing cover facilitate dismantling of the pump casing.
- Available as an option: KSB Guard for monitoring temperature and vibrations
Applications:
- Handling clean or aggressive fluids not chemically and mechanically aggressive to the pump materials.
- Water supply systems
- Cooling circuits
- Swimming pools
- Fire-fighting systems
- General irrigation systems
- Drainage systems
- Heating systems
- Air-conditioning systems
- Spray irrigation systems
Technical Data
- Function – Pump
- Connection type – Flange
- Drive concept – With electric actuator
- Max. flow rate – 740 m³/h
- Min. flow rate – 1 m³/h
- Max. head – 160 m
- Min. head – 1 m
- Mains frequency – 50 Hz, 60 Hz
- Mains voltage – 220 V, 230 V, 380 V, 400 V, 415 V, 440 V, 460 V, 480 V, 500 V, 575 V, 660 V, 690 V
