Description
Festo Positioner CMSX-P-S-C-U-F1-D-130-A
- Design Digital, electropneumatic positioner
- Mode of operation Double-acting
- Design characteristics Safety position – pneumatic outlet 4 exhausted
- Safety position – pneumatic outlet 2 pressurised
- Mounting position optional
- Type of mounting With accessories
- Functional principle of measuring system Potentiometer
- Sensing range 0 deg … 100 deg
- Display 7-segment
- LCD display
- With backlighting
- Setting options Via display and keys
- Size of dead zone 0.5 % … 10 %
- Operating pressure 0.3 MPa … 0.8 MPa
- Operating pressure 3 bar … 8 bar
- Operating pressure 43.5 psi … 116 psi
- Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
- Note on operating and pilot medium Lubricated operation not possible
- Standard nominal flow rate 130 l/min
- Pneumatic connection G1/8
- Nominal operating voltage DC 24 V
- Operational voltage range DC 21.6 V … 26.4 V
- Max. current consumption 600 mA
- Reverse polarity protection For operating voltage connections
- digital input, signal range 0 – 10 V
- 0 – 20 mA
- 4 – 20 mA
- Analogue inputs, max. dynamic range 0 – 24 mA
- 0 – 11 V
- Analogue inputs, linearity error at 25 °C 0.5%
- Analogue inputs, temperature coefficient <0.02 %FS/K
- Analogue inputs, resolution 16 bit
- Analog inputs, overload protection yes
- Analogue inputs, electrical isolation no
- digital output, signal range 4 – 20 mA
- Analogue outputs, max. load impedance ≤600 Ohm
- Analogue outputs, linearity error at 25°C 0.5%
- Analogue outputs, temperature coefficient <0.02 %FS/K
- Analogue outputs, resolution 12 bit
- Analogue outputs, reverse polarity protection yes
- Analog outputs, short circuit current rating yes
- Analog outputs, overload protection yes
- Analogue outputs, galvanic isolation no
- Characteristic for inputs To IEC 61131-2, type 3
- Switching input PNP
- NPN
- Digital inputs, reverse polarity protection yes
- Digital inputs, electrical isolation Yes, via optocoupler
- Digital outputs, reverse polarity protection yes
- Switching output 3 x PNP or 3 x NPN, switchable
- Digital outputs, output current 100 mA
- Digital outputs, short circuit current rating yes
- Digital outputs, overload protection yes
- Digital outputs, electrical isolation Yes, via optocoupler
- Electrical connection 1, function 3x digital output
- Analogue output
- Analogue input
- Digital input
- Power supply
- Load power supply
- Electrical connection 1, connection type Terminal strip
- Electrical connection 1, connector system Screw terminal
- Electrical connection 1, number of connections/cores 13
- Electrical connection 1, tightening torque 0.6 Nm
- Electrical connection 1, conductor cross section <1.5 mm²
- Cable fitting M20 x 1.5 for electrical connection 1
- Permissible cable diameter 7 – 13 mm for electrical connection 1
- Max. cable length 30 m for electrical connection 1
- Ambient temperature -5 °C … 60 °C
- Storage temperature -20 °C … 60 °C
- Relative air humidity 5 – 95%
- Non-condensing
- Degree of protection IP65
- Corrosion resistance class CRC 2 – Moderate corrosion stress
- Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
- As per EN 60068-2-29
- Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN
- 60068-2-6
- As per EN 60068-2-6
- Pollution degree 3
- Approval RCM trademark
- CE mark (see declaration of conformity) To EU EMC Directive
- In accordance with EU RoHS Directive
- CE marking (see declaration of conformity) To UK instructions for EMC
- To UK RoHS instructions
- Material housing PC-reinforced
- Material screen PC
- Material base plate Wrought aluminium alloy, anodised
- Material shaft High-alloy stainless steel
- Material coupling High-alloy stainless steel
- Material screws High-alloy stainless steel
- Material seals NBR
- Material cable gland PA
- Material blanking plug PA
- LABS (PWIS) conformity VDMA24364-B2-L
- Note on materials RoHS-compliant
- Product weight 970 g
- Dimensions (W x L x H) 190 mm x 105 mm x 130 mm
