Description
Festo Compact cylinder ADN-80-250-A-P-A
- Stroke 1 mm … 500 mm
- Piston diameter 80 mm
- Cushioning Elastic cushioning rings/plates at both ends
- Self-adjusting pneumatic end-position cushioning
- Mounting position optional
- Conforms to standard ISO 21287
- Design Piston
- Piston rod
- Profile barrel
- Position detection Via proximity switch
- Variants EX protection approval (ATEX)
- Metals with copper, zinc or nickel as main constituent are excluded from
- use. Exceptions are nickel in steel, chemically nickel-plated surfaces,
- printed circuit boards, cables, electrical plug connectors and coils.
- Improved running performance
- Extended male piston rod thread
- Custom thread on the piston rod
- Extended piston rod
- With protection against rotation
- High corrosion protection
- Dust protection
- Uniform, slow movement
- Low friction
- Through piston rod
- Through, hollow piston rod
- Heat-resistant seals max. 120°C
- Laser etched rating plate
- Temperature range -40 to 80°C
- Piston rod at one end
- Operating pressure 0.06 MPa … 1 MPa
- Operating pressure 0.6 bar … 10 bar
- Mode of operation Double-acting
- CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
- CE marking (see declaration of conformity) To UK EX instructions
- Explosion protection Zone 1 (ATEX)
- Zone 2 (ATEX)
- Zone 21 (ATEX)
- Zone 22 (ATEX)
- ATEX category gas II 2G
- ATEX category dust II 2D
- Explosion ignition protection type for gas Ex h IIC T4 Gb
- Explosion ignition protection type for dust Ex h IIIC T120°C Db
- Explosion ambient temperature -20°C <= Ta <= +60°C
- Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
- Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
- Corrosion resistance class CRC 0 – No corrosion stress
- 2 – Moderate corrosion stress
- 3 – high corrosion stress
- LABS (PWIS) conformity VDMA24364-B1/B2-L
- VDMA24364 zone III
- Suitability for the production of Li-ion batteries Metals with more than 1% by mass of copper, zinc or nickel by mass
- are excluded from use. Exceptions are nickel in steel, chemically nickelplated surfaces, printed circuit boards, cables, electrical plug connectors and coils
- Ambient temperature -40 °C … 120 °C
- Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 2827 N
- Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 2827 N … 3016 N
- Additional weight per piston rod extension of 10 mm 25 g
- Additional weight per piston rod thread extension of 10 mm 16 g
- Type of mounting Either:
- With through-hole
- Via female thread
- With accessories
- Pneumatic connection G1/8
- Note on materials RoHS-compliant
- Material collar screws Steel
- Material cover Die-cast aluminium, coated
- Anodised wrought aluminium alloy
- Material piston rod High-alloy steel
- Material cylinder barrel Smooth-anodised wrought aluminium alloy
