Description
Festo Proximity sensor SDBT-MSX-1L-NU-E-2.5-N-LE
- Design For T-slot
- Based on standard EN 60947-5-2
- Symbol 00995965
- Approval RCM trademark
- c UL us listed (OL)
- CE mark (see declaration of conformity) To EU EMC Directive
- In accordance with EU RoHS Directive
- CE marking (see declaration of conformity) To UK instructions for EMC
- To UK RoHS instructions
- Certificate issuing authority UL E232949
- Note on materials RoHS-compliant
- Free of halogen
- Instructions on use https://www.festo.com/Drive-Sensor-Overview
- Measured variable Position
- Measuring principle Magnetic Hall
- Ambient temperature -40 °C … 85 °C
- Max. travel speed 3 m/s
- Repetition accuracy 0.1 mm
- Switching output PNP/NPN, switchable
- Switching element function N/C or N/O contact, switchable
- Hysteresis 0.2 mm
- Switch-on time ≤2 ms
- Switch-off time ≤2 ms
- Max. switching frequency 200 Hz
- Max. output current 100 mA
- Max. output current using mounting kits 100 mA
- Max. switching capacity DC 2.8 W
- Max. switching capacity DC using mounting kits 2.8 W
- Voltage drop <1.5 V
- Min. load current 0.15 mA
- Off-state current <0.2 mA
- Short circuit current rating yes
- Overload protection Available
- Rated operational voltage DC 24 V
- Operational voltage range DC 10 V … 30 V
- Reverse polarity protection For all electrical connections
- Electrical connection 1, connection type Cable
- Electrical connection 1, connector system Open end
- Electrical connection 1, number of connections/cores 3
- Connection outlet orientation In-line
- Test conditions cable Bending strength: to Festo standard
- Test conditions on request
- Torsional resistance: > 300,000 cycles, ± 270°/0.1 m
- Energy chain: > 5 million cycles, bending radius 28 mm
- Cable length 2.5 m
- Cable characteristic Suitable for energy chains/robot applications
- Cable sheath colour grey
- Material cable sheath TPE-U(PUR)
- Wire ends Wire end sleeve
- Type of mounting Screw-clamped
- Insertable in the slot from above
- Max. tightening torque 0.6 Nm
- Mounting position optional
- Product weight 29 g
- Housing colour Black
- Material housing PA-reinforced
- High-alloy stainless steel
- Switching status indication Yellow LED
- Status indication Green LED
- Setting options Auto teach-in
- Capacitive pushbutton
- Ambient temperature with moving cable -20 °C … 85 °C
- Degree of protection IP68
- LABS (PWIS) conformity VDMA24364-B2-L
- Suitability for the production of Li-ion batteries Metals with more than 1% by mass of copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically
- nickelplated surfaces, printed circuit boards, cables, electrical plug connectors and coils
- Cleanroom class Class 4 according to ISO 14644-1
