Description
Festo Solenoid Valve VSNC-FC-M52-MD-G14-F8-182
- Valve function: 5/2 double solenoid 5/2-way or 3/2-way, convertible 5/3-way, pressurised 5/3 exhausted 5/3 closed
- Type of actuation: Electric
- Construction width: 32 mm
- Standard nominal flow rate: 800 l/min … 1350 l/min
- pneumatic working port: NAMUR port pattern
- Operating voltage: 110V AC 120V AC 12V DC 230V AC 240V AC 24V AC 24V DC 48V AC 48V DC Via solenoid coil, must be ordered separately
- Operating pressure: 0.15 MPa … 1 MPa
- Operating pressure: 1.5 bar … 10 bar
- Design: Piston gate valve Poppet seat
- Type of reset: Mechanical spring
- Approval: c UL us – Recognized (OL)
- CE mark (see declaration of conformity): To EU Explosion Protection Directive (ATEX) To EU Low Voltage Directive
- Explosion protection certification outside the EU: Class I, Div. 1 (US) Class I, Div. 2 (US) Class II, Div. 1 (US) Class II, Div. 2 (US) Class III, Div. 1 (US) Class III, Div. 2 (US) EPL Da (IECEx) EPL Db (IEC-EX) EPL Db (KR) EPL Dc (KR) EPL Ga (IEC-EX) EPL Ga (KR) EPL Gb (IECEx) EPL Gb (KR) EPL Gc (KR)
- Certificate issuing authority: DNVGL-TAA000011J
- ATEX category gas: II 2G II 3G
- ATEX category dust: II 2D II 3D
- Explosion ignition protection type for gas: AEx m II T4 Ex db IIC T4 Gb Ex db IIC T5 Gb Ex ia IIC T6 Ga Ex ia IIC T6…T5 Ga Ex mb IIC T6 Ex nA IIC T5 X Gc
- Explosion ignition protection type for dust: Ex ia IIIB T135°C Da Ex mb tb IIIC T80°C Ex t IIIC T80°C Db Ex tb IIIC T100°C Db Ex tb IIIC T135°C Db Ex tc IIIC T95°C X Dc
- Explosion ambient temperature: -20°C <= Ta <= +50°C -20°C <= Ta <= +60°C -40°C <= Ta <= +50°C -40°C <= Ta <= +65°C -65°C <= Ta <= +40°C -65°C <= Ta <= +55°C
- Degree of protection: IP65 IP66 IP67 With plug socket To IEC 60529
- Exhaust-air function: With flow control option
- Sealing principle: Soft
- Mounting position: optional
- Conforms to standard: VDI/VDE 3845 (NAMUR)
- Manual override: Detenting None Non-detenting Covered
- Type of piloting: Pilot actuated
- Pilot air supply: Internal
- Flow direction: Non-reversible
- Symbol: 00991005 00991018 00991021 00991080 00991082 00991083 00991728 00991831 00991953 00995701
- lap: Positive overlap Underlap
- Signal status display: With accessories
- b value: 0.4 … 0.5
- C value: 2.1 l/sbar … 5.6 l/sbar
- Standard nominal flow rate, exhaust return 4->3110 l/min
- Switching time off: 6 ms … 120 ms
- Switching time on: 4 ms … 35 ms
- Switching time reversal: 2 ms … 55 ms
- Duty cycle: 100%
- Characteristic coil data: 110/120 V AC: 50/60 Hz, pick-up power 2.7 VA, holding power 1.9 VA 110/120 V AC: 50/60 Hz, pick-up power 4.4 VA, holding power 3.3 VA 110/120 V AC: 50/60 Hz, pick-up power 5.2 VA, holding power 3.1 VA 110/120 V AC: 50/60 Hz, pick-up power 6.9 VA, holding power 3.1 VA 110 V AC: 50/60 Hz, pick-up power 7.7 VA, holding power 3.8 VA 120 V AC: 60 Hz, pick-up power 10.0 VA, holding power 6.8 VA 12 V DC: 2.8 W 12 V DC: 3.4 W 230/240 V AC: 50/60 Hz, pick-up power 3.9 VA, holding power 2.8 VA 230/240 V AC: 50/60 Hz, pick-up power 5.8 VA, holding power 4.6 VA 230 V AC: 50/60 Hz, pick-up power 10.0 VA, holding power 6.0 VA 230 V AC: 50/60 Hz, pick-up power 11.5 VA, holding power 8.0 VA 230 V AC: 50/60 Hz, pick-up power 6.2 VA, holding power 3.7 VA 230 V AC: 50/60 Hz, pick-up power 6.9 VA, holding power 4.1 VA 24 V DC: 0.8 W 24 V DC: 2.1 W 24 V DC: 2.7 W 24 V DC: 3.3 W 24 V DC: 4.6 W 24 V AC: 50/60 Hz, pick-up power 2.5 VA, holding power 1.7 VA 24 V AC: 50/60 Hz, pick-up power 3.9 VA, holding power 2.6 VA 24 V DC: 0.7 W 24 V DC: 1.2 W 24 V DC: 2.6 W 48 V AC: 50/60 Hz, pick-up power 2.5 VA, holding power 1.7 VA 48 V AC: 50/60 Hz, pick-up power 3.9 VA, holding power 2.7 VA 48 V DC: 2.8 W 48 V DC: 3.4 W See solenoid coil, to be ordered separately
- Permissible voltage fluctuations: +/- 10 %
- Explosion protection: Class I, Div. 1 (US) Class I, Div. 2 (US) Class II, Div. 1 (US) Class II, Div. 2 (US) Class III, Div. 1 (US) Class III, Div. 2 (US) The information in the certificate must be observed! Zone 0 (IEC-EX) Zone 0 (KR) Zone 1 (ATEX) Zone 1 (IEC-EX) Zone 1 (KR) Zone 2 (ATEX) Zone 2 (KR) Zone 20 (IEC-EX) Zone 21 (ATEX) Zone 21 (IEC-EX) Zone 21 (KR) Zone 22 (ATEX) Zone 22 (KR)
- Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
- Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
- Corrosion resistance class CR: C2 – Moderate corrosion stress
- LABS (PWIS) conformity: VDMA24364-B2-L
- Media temperature: -20 °C … 60 °C
- Ambient temperature: -20 °C … 60 °C
- Product weight: 335 g … 685 g
- Electrical connection: 3-pin Type A Type B Cable connector M20x1.5 M12x1, A-coded to EN 61076-2-101 Plugs To EN 175301-803 To industry standard (11 mm)
- Type of mounting: With through-hole
- Breather connection: Not ducted
- Pneumatic connection, port 1: G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-1/4 QS-5/16 QS-3/8
- Pneumatic connection, port 2: NAMUR port pattern
- Pneumatic connection, port 3: G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-1/4 QS-5/16 QS-3/8
- Pneumatic connection, port 2: NAMUR port pattern
- Pneumatic connection, port 3: G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-1/4 QS-5/16 QS-3/8
- Pneumatic connection, port 4: NAMUR port pattern
- Pneumatic connection, port 5: G1/4 1/4 NPT QS-6 QS-8 QS-10 QS-5/16 QS-1/4 QS-3/8
- Note on materials: RoHS-compliant
- Material seals: NBR
- Material housing: Wrought aluminium alloy
- Material screws: Galvanised steel
