Fifish V-EVO Specifications

Posted on 2023-06-172023-06-17 by ecbarrion

ROV

Dimensions: 383 mm x 331 mm x 143 mm(15 in × 13 in × 5 5/8 in)
Weight: 4.1 kg (9 lbs)
Thrusters: 6 (4 × Vector + 2 × Horizontal)
Maneuverability: 6 DOF (Degree of Freedom); Moving: left & right, up & down, forward & backward; Rotation: 360° yaw, 360° pitch, 360° roll
Posture lock: ± 0.1° pitch angle or ± 0.1° roll angle and moving in any direction
Depth holding: Suspending in ± 1 cm
Speed: Max 3 knots (1.5 m/s) in still water
Depth rating: 100 m (328 ft)
Operating temperature: 10 °C ~ 60 °C (14 °F ~ 140 °F)
Battery: 1~ 4 hours, Rated Capacity 9,000 mAh / 97.2 Wh

Camera

Sensor: 1/2.3” SONY CMOS; Effective Pixels 12MP; ISO Range 100-6400 in Auto / Manual
Lens: Field of View 166°; Aperture f/2.5; Min Focusing Distance 0.3 m
Shutter: 5~1/5000 second ; Auto/Manual (Electronic Shutter Speed)
Burst shooting: 1 / 3 / 5 / 10 / 15 frames
White balance: 2,500K ~ 10,000K ; Auto / Manual
Exposure compensation: 3 EV ~ + 3 EV
Photo resolution: 4:3: 4000 x 3000
Photo format: JPEG
Video resolution: 4K UHD: 25/30/50/60 fps (50/60 fps are limited to H.264 format ); 1080P FHD: 25/30/50/60/100/120 fps; 720P HD: 25/30/50/60/100/120/200/240 fps
Video encode: MPEG4- AVC/H.264, HEVC/H.265
Stabilization: EIS (Electronic Image Stabilization)
Color system: NTSC & PAL
Internal storage: 64 GB standard (Maximum support 256GB)

LED Beams

Brightness: 5000 lumen
CCT: 5500 K (Correlated Color Temperature)
Beam angle: 120°
Internal storage: 3

Charger

ROV: Input: 100-240 V, 50/60 Hz，1.3 A MAX, Output: 12.6 V – 5A, AC
RC: Input: 100-240 V, 50/60 Hz，0.5 A MAX, Output: 5 V – 3A, DC

Remote Controller

Wireless: 5 GHz Wi-Fi supported
Battery life: 1~ 4 hours
Copy and download: Support Micro SD Card FAT32 and exFAT format

Tether and Spool

Dimensions: 238 mm × 205 mm × 207 mm (9 3/8 in × 8 1/8 in × 8 1/8 in)
Capability: Hold up to 100 m tether (328ft)
Breaking force: 80 kgf

Robotic Arm

Claws opening: 120 mm
Gripping force: 7.0 kg (15.4 lbs

FIFISH PRO W6 – Best Choice for Underwater Ship Hull Maintenance & Inspection Robot (Video)

Posted on 2023-06-162023-06-17 by ecbarrion

FIFISH PRO W6 – Best Choice of Underwater Ship Hull Maintenance & Inspection Robot

Save on hull inspections costs by using Fifish PRO W6.
Eliminate slow and risky manned inspections.
Fast inspections every time.
Inspect ship’s hull, rudder, stern thruster, bow, stern tube bearing, shaft, propeller, side thruster, and more.
Identify rust, damages, irregularities, and more.

For Philippines inquiries about FIFISH ROVS, please contact Braamd Inc. at [email protected].

FIFISH PRO W6 Industrial-Grade Subsea Drone (VIDEO)

Posted on 2023-06-162023-06-16 by ecbarrion

FIFISH PRO W6 Industrial-Grade Subsea Drone. The FIFISH PRO W6 is an industrial-grade ROV with advanced capabilities and tools for performing underwater structural inspections and deep-diving explorations with efficiency, power, and precision.

350m dive depth & switchable battery pack
Q-motor system for stabilization against strong currents
Smart systems for avoiding collisions and locating its real-time location
Powerful extension tools for salvaging items and sampling elements
Innovative modular interfaces for adding on multiple extension tools

BRAAMD in the Philippine Distributor of QYSEA – FIFISH ROV Drones. Please contact us to inquire.

Spot the Dwyer (Phil. Ed) – Series 2000 Dwyer Differential Pressure Gage – Magnehelic and Series RM Dwyer Rate-Master Polycarbonate Flowmeter

Posted on 2023-06-162023-06-16 by ecbarrion

Spot the Dwyer (Phil. Ed) – Series 2000 Dwyer Differential Pressure Gage – Magnehelic and Series RM Dwyer Rate-Master Polycarbonate Flowmeter

This month’s #SpotTheDwyer shows a Dwyer Series 2000 Magnehelic Differential Pressure Gage (Model 2002) and Dwyer Series RM Rate-Master Polycarbonate Flowmeter (Model RMA-4) installed in water treatment plant. Providing reliable local indication, the Series 2000 is used to monitor differential pressure, and Series RM to monitor flow of chemicals.

To learn more about these Dwyer products please click below:

Series 2000 Differential Pressure Gage:
https://braamdstore.com/product-tag/magnehelic/

Series RM Rate-Master:
https://braamdstore.com/shop/instrumentation-control/flow/dwyer-series-rm-rate-master-polycarbonate-flowmeter/

The Elios 3 RID Variant

Posted on 2023-06-142023-06-14 by ecbarrion

We are pleased to announce that Elios 3 is now compliant with the UAS Remote Identification regulation imposed by the Federal Aviation Administration in the United States of America to all UAS pilots flying outdoors. The Elios 3 RID is a variant of the Elios 3 that is specifically designed to address the US market. It is available for sale in all regions but please note that the Elios 3 RID version is NOT compliant with other Remote ID regulations than the US one. On the other hand, the standard version of the Elios 3 is no longer available for sale in the US.

Meanwhile, standard Elios 3 Models is available for sale for the Philippine market. Contact us for your Elios 3 inquiries.

Braamd (Air) Cool New Tees

Posted on 2023-05-272023-05-27 by ecbarrion

Braamd (Air) Cool New Tees

Festo Automation in the Semiconductor Industry

Posted on 2023-05-242023-05-24 by ecbarrion

Festo in Semicon and Electronics Manufacture

For system availability for manufacturers of semiconductors, Festo Automated solutions that are both reliable and economical are available in just one quick call.

Valve terminal VTOC

The compact pilot valve terminal for a wide variety of pneumatic applications for reliably controlling pneumatic media valves. Plus interlock option for greater safety. Controlled via multi-pin or fieldbus interface, the VTOC is also suitable for IO-Link®.

Valve terminals VTUG

Valve terminal VTUG with multi-pin or fieldbus interface. Compact, universal, with high flow rates. Optimized valve terminal variants for installation in control cabinets, with manifold rail for increased corrosion protection. Also with hot swap function for replacing valves without interrupting the ongoing process.

Quarter turn actuator DFPD

The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range. The quarter turn actuators DFPD are perfect for automating your butterfly valves, ball valves and dampers.

Ball valve VZBF

The two-part stainless steel ball valve for liquid and gaseous media is easy to maintain. Its fire safe design complies with the requirements of API 607.

Angle seat valve VZXA

Extremely high flow rates, an easy-to-clean design and a modular structure. You can combine valve bodies and actuators to suit your application and make it more flexible.

Pinch valve VZQA

Normally closed or normally open? The choice is yours. With the pinch valve VZQA, you can control media flows such as granulate, fluids containing solids and highly viscous or abrasive media even better. The compact valve is quick to install, easy to clean and offers modular configuration.

Solenoid valve VZWF

The force pilot operated pneumatic valves VZWF control high pressures with high nominal diameters using relatively small solenoids, even in closed media circuits with no differential pressure.

Proportional-pressure regulator VEAB

For pressure ranges up to 6 bar: piezo technology makes the VEAB extremely precise and gives it a very long service life. Other benefits include extremely short switching times, quiet operation and very low power consumption.

Proportional-pressure regulator VEAA

For pressure ranges up to 10 bar: piezo technology makes the VEAA extremely precise and gives it a very long service life. Other benefits include extremely short switching times, quiet operation and very low power consumption.

Valve terminal type CPX-MPA

Valve terminal type CPX-MPA, if additional I/Os are required, for example to control electric valves, integrate sensors or create closed-loop control circuits. With this terminal, diagnostics and remote maintenance functions can also be carried out.

Flow sensor SFAW

Simple monitoring with the flow sensor SFAW as it measures the flow rate, consumption and temperature of liquid media. Its easy operation and easily readable display make the SFAW highly reliable.

Pressure sensor SPAW

For hydraulic and pneumatic applications: the compact pressure sensor SPAW has 9 measuring ranges from −1 … 1 and 0 … 100 bar. Suitable for all media, such as water, coolants or gases, that don’t corrode the stainless steel housing and the measuring element.

Above are just examples of Festo products in the Semicon industry. Know that Festo has a broad product portfolio for machines used in the manufacture of electronic components. Please contact us and our Festo Sales and Application Engineer will be happy to talk to you.

Differential Pressure Switch/Gage within Semiconductor Fabs

Posted on 2023-05-232023-05-23 by ecbarrion

Differential Pressure Switch/Gage within Semiconductor Fabs

In simple terms, a semiconductor transistor is a part with specific electronic properties that allow it to serve as a component in microchips and modern electronics like phones, laptops, and more. As these components are small and require precise manufacturing methods, there are facilities dedicated to their manufacture.

These facilities consist of several levels including air handlers and scrubbers for exhaust, HEPA room, fab cleanroom, and subfab areas. The control of differential pressure within the facility is essential for the safety of both equipment and personnel.

In the Cleanroom:

Semiconductor process tools are located within a fab cleanroom. Portions of these tools (e.g. chamber maintenance areas, gas & chemical enclosures, etc.) are plumbed to a local fume exhaust system. Process tools need to be plumbed to a local fume exhaust system due to the potential for accidental release of toxic fumes, gasses, and/or vapors in the surrounding environment. In the event of a fume exhaust shutdown, the Dwyer Instruments Photohelic® switch/gage helps ensure that the process tool will shut down to an isolated/safe-state to contain these potential hazards in the event of an emergency.

In the Subfab:

Semiconductor subfabs are located directly beneath fab cleanrooms. Within the subfab, ancillary equipment such as ultra-high vacuum pumps, abatement systems, chillers, heat exchangers, and other miscellaneous equipment is interconnected to the process tools directly above. Among these pieces of equipment, abatement systems utilize Dwyer’s Photohelic® switch/gages on their exhaust ports. Abatement systems are interconnected between the process tools, ultra-high vacuum pumps, and subfab house scrubber systems. Exhaust ports are plumbed directly to the subfab house scrubber system and need to be monitored due to a number of hazardous by-products and glasses being abated. In the event of a house scrubber shutdown, the Photohelic® switch/gage helps ensure that the abatement system will shutdown to an isolated/safe-state to contain these potential hazards in the event of an emergency shutdown.

Dwyer Instruments Photohelic® switch/gage also ensures proper balancing is localized to the individual tool and is set to the system owner’s parameters. Its solid state construction has been utilized by the semiconductor industry for decades and continues to be the go-to for differential pressure monitoring and safety within semiconductor fabs located throughout the world.

The Series 3000MR/3000MRS Photohelic® switch/gage combines the function of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage. The gage reading is unaffected by switch operation and will indicate accurately even if power is interrupted. As an additional safety measure, the Series 3000MR/3000MRS has optional tamper proof knobs which can be ordered by adding “-TAMP” to the end of the model number when ordering.

When it’s critical, it has to be Dwyer.

Dwyer® products are used in many critical applications around the globe, in many different industries. From building control to medical applications, Dwyer® products play a vital role in keeping people safe.

If you have any questions about selecting products for your application, the Dwyer Applications Engineers are available to assist by phone at +63917 5442310, or by email at [email protected] or [email protected]

Source: Differential Pressure Switch/Gage within Semiconductor Fabs.

https://blog.dwyer-inst.com/2023/05/09/differential-pressure-switch-gage-within-semiconductor-fabs/