Everexceed 30VDC 10A UXcel Mini Battery Charger

Posted on
Everexceed 30VDC 10A UXcel Mini Battery Charger

Everexceed 30VDC 10A UXcel Mini Battery Charger

The industrial battery charger provides a advanced solution with Small substations and power plants system. Rectifier battery charger combines reliability from naturally cooled thyristor-based rectifier with proven microprocessor control technology to offer the best performances in any electrical and environmental conditions. It’s suitable for charging VRLA sealed lead acid, Lithium battery as well as maintenance free nickel-cadmium batteries.

Specifications:

INPUT
Nominal input voltage120/208/220/230/240VAC+10% ,Single phase (Other voltages can be customized)
Frequency50/60Hz±5%
OUTPUT
Output voltage24V, 30V, 48V, 50V
Output voltage range100%-150% nominal voltage
Output current10A, 15A, 20A
Ripple voltageWithin 5% RMS at full load&max.DC voltage
CurrentLimited to 110% of In
Output Regulation±1% for 198 to 242VAC supply voltage
Analog measurementsOutput voltmeter and amperemeter,load voltmeter and amperemeter(Dropping diode type)
Local alarmsMains fault,output under voltage,output overvoltage,ground fault
Mode of operationBoost/float, Manual/Automatic
ProtectionsOverload/short circuit,Charger fuses,Battery and load breaker,Over temperature protection
Available languagesEnglish,Spanish(Optional)
GENERAL INFORMATION
Cabinet DimessionBattery inside cabinet:1100H*580W*600D
Battery outside cabinet:350H*440W*500D
Degree of protectionIP20
ColorRAL7035
Operating Temperature0℃ to 45℃,Up to 55℃ with power derating
Humidity10% to 95% non condensing
Installation heightUp to 1000m over sea level. Up to 3000m with power derating
ConnectionBottom
OPTIONAL
CommunicationRJ45,Modbus TCP/IP
RS485,Modbus RTU
DNP3.0
Volt-free contacts
Remote monitoring