Everexceed 30VDC 10A UXcel Mini Battery Charger
The industrial battery charger provides a advanced solution with Small substations and power plants system. Rectifier battery charger combines reliability from naturally cooled thyristor-based rectifier with proven microprocessor control technology to offer the best performances in any electrical and environmental conditions. It’s suitable for charging VRLA sealed lead acid, Lithium battery as well as maintenance free nickel-cadmium batteries.
Specifications:
INPUT | |
Nominal input voltage | 120/208/220/230/240VAC+10% ,Single phase (Other voltages can be customized) |
Frequency | 50/60Hz±5% |
OUTPUT | |
Output voltage | 24V, 30V, 48V, 50V |
Output voltage range | 100%-150% nominal voltage |
Output current | 10A, 15A, 20A |
Ripple voltage | Within 5% RMS at full load&max.DC voltage |
Current | Limited to 110% of In |
Output Regulation | ±1% for 198 to 242VAC supply voltage |
Analog measurements | Output voltmeter and amperemeter,load voltmeter and amperemeter(Dropping diode type) |
Local alarms | Mains fault,output under voltage,output overvoltage,ground fault |
Mode of operation | Boost/float, Manual/Automatic |
Protections | Overload/short circuit,Charger fuses,Battery and load breaker,Over temperature protection |
Available languages | English,Spanish(Optional) |
GENERAL INFORMATION | |
Cabinet Dimession | Battery inside cabinet:1100H*580W*600D |
Battery outside cabinet:350H*440W*500D | |
Degree of protection | IP20 |
Color | RAL7035 |
Operating Temperature | 0℃ to 45℃,Up to 55℃ with power derating |
Humidity | 10% to 95% non condensing |
Installation height | Up to 1000m over sea level. Up to 3000m with power derating |
Connection | Bottom |
OPTIONAL | |
Communication | RJ45,Modbus TCP/IP |
RS485,Modbus RTU | |
DNP3.0 | |
Volt-free contacts | |
Remote monitoring |